公司新聞

簡述裝載機噪音大怎么辦

來源：http://shyy66.com/ 日期：2023-04-24

伴隨著我國機械化進程的加快，大型機械化作業已經是整個重工業的標配，裝載機被廣泛應用于各大領域，如道路、建筑、礦山等，主要負責對沙土、石灰和礦石粉末等粉末狀物料的挖掘和運輸工作，搭配不同的輔助工作裝備，甚至可以進行推土、起重等工作，可謂是一臺一起多用。

With the acceleration of China's mechanization process, large-scale mechanized operations have become the standard equipment for the entire heavy industry. Loaders are widely used in various fields, such as roads, buildings, mines, etc., mainly responsible for the excavation and transportation of powder materials such as sand, lime, and ore powder. With different auxiliary work equipment, they can even be used for soil pushing, lifting, and other work, which can be described as a multi-purpose machine.

但其實這么好的設備，也會存在一點問題，其在作業時會產生一定的噪音，隨著技術的不斷進步，噪音已經可以控制在合理范圍內，但是有客戶咨詢我們說近期裝載機變大，找不到原因，下面濟南裝載機租賃廠小編來為大家解決這個問題：

But in fact, such a good equipment may also have some problems. It produces a certain amount of noise during operation. With the continuous progress of technology, the noise can be controlled within a reasonable range. However, some customers have consulted us and said that the loader has become larger recently, and we cannot find the reason. Below, the editor of Jinan Loader Rental Factory will solve this problem for everyone:
濟南裝載機租賃

要知道，噪音產生的原因主要來源于機械噪音：

It should be noted that the main source of noise is mechanical noise:

1、由于裝載機柴油機上運動副很多，所以引起的機械激振力也很多，其中有活塞與氣缸敲擊產生的噪聲，正時齒輪響聲，燃油噴射系統噪聲，配氣機構噪聲等。

1. Due to the many motion pairs on the diesel engine of the loader, there are also many mechanical excitation forces caused, including the noise generated by piston and cylinder knocking, timing gear noise, fuel injection system noise, and valve train noise.

2、在發動機中，曲軸、飛輪、皮帶輪等轉動部件中的任何一個都會形成振動力，由于這個振動力與部件的不平衡量成正比，與其每分鐘轉速的平方成正比，因此，當轉速增加時，振動也被急劇放大，所以轉動部件之間的平衡量小一些。

2. In an engine, any rotating component such as the crankshaft, flywheel, pulley, etc. forms a vibration force. As this vibration force is proportional to the imbalance of the component and the square of its speed per minute, as the speed increases, the vibration is also sharply amplified, resulting in a smaller balance between rotating components.

其它機械噪音來自發動機活塞、氣門機構等，構成了發動機噪音的一部分，如活塞敲缸，挺桿噪音，氣門開閉所產生的噪音，氣門和氣門彈簧振動所產生的噪音，以及正時鏈與鏈輪嚙合時產生的噪音。

Other mechanical noise comes from the engine pistons, valve mechanisms, etc., which form a part of the engine noise, such as piston knocking, tappet noise, noise generated by valve opening and closing, noise generated by valve and valve spring vibration, and noise generated when the timing chain engages with the sprocket.

3、活塞敲缸是活塞側面敲擊缸壁所產生的噪音，當作用到活塞上的壓縮壓力轉變?yōu)槿紵龎毫r，就產生了敲缸?；钊酶滓蚧钊g隙的不同而不同，活塞間隙大時，有可能產生敲缸聲?；钊酶椎奶攸c(diǎn)是發動機冷態時很響，因此時活塞間隙大，隨著發動機的溫升，聲音也變小。

3. Piston knocking is the noise generated by the side of the piston striking the cylinder wall. When the compression pressure acting on the piston changes into combustion pressure, knocking occurs. The piston knocking on the cylinder varies depending on the piston clearance, and when the piston clearance is large, there may be a knocking sound. The characteristic of piston knocking on the cylinder is that the engine makes a loud noise when it is cold, because the piston clearance is large at this time, and as the engine temperature rises, the sound also decreases.

要減輕活塞敲缸，必須減少主側壓力，因此有些發動機將活塞銷的中心與活塞中心線偏離一定距離，即可減少敲缸聲。減少活塞敲缸的另一方法是在活塞裙部安裝鋼架，用以減少活塞裙部的熱變形，從而可使用尺寸略大的活塞，將活塞間隙減小，使活塞敲缸聲變小。

To reduce piston knocking, it is necessary to reduce the main side pressure. Therefore, some engines can reduce the knocking sound by deviating the center of the piston pin from the centerline of the piston by a certain distance. Another method to reduce piston knocking on the cylinder is to install a steel frame on the piston skirt to reduce thermal deformation of the piston skirt. This allows for the use of slightly larger pistons to reduce piston clearance and reduce the sound of piston knocking on the cylinder.

以上裝載機噪音分析，相信肯定對您有所幫助，發現機器噪音異常時，應當及時處理，先從以上三點開始排查，如果仍然沒有解決，您可以來電咨詢我們http://shyy66.com，我們將為您提供各方面的技術支持！

The above analysis of loader noise is believed to be helpful to you. If any abnormal machine noise is found, it should be dealt with in a timely manner. Starting from the above three points, the investigation should be carried out first. If it is still not resolved, you can call us for consultation http://shyy66.com We will provide you with technical support in all aspects!

上一條：挖掘機受損需要根據具體情況進行處理！

下一條：壓路機原理其實是非常簡單的！